lock plus

FastFerment 14 Gallon Conical Fermenter

FastFerment
$164.99

Easy & Efficient

The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods. With less equipment, clean up is easy.

Premium

FastFerment is a professional system for the average Homebrewer & Winemaker. The conical design limits exposure to oxygen & allows for yeast harvesting. The end result is consistent high quality batches of beer & wine.

Benefits Over Traditional Conicals

The downfall of other conical fermenters is that you have to ferment the product with the valve closed and then the sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the sediment out the bottom. This results in two main issues:

  1. You need to time the flushing of the sediment perfectly to ensure minimal loss of product.
  2. As the sediment is flushed out, there will always be yeast and the sediment hazes that float up into the product remaining in the unit.

Specifications

  1. Conical Body & Collection Ball
    • +33% Thicker than the 7.9G FastFerment
    • Food Grade HDPE
    • Collection Ball Volume - 40.6 oz / 1200ml

 

    • 1.5" 3.8 cm Teflon Seated Valve
    • +33% Larger than the 7.9G FastFerment
    • All BPA Free Plastics

 

  • Heights
  • To top of airlock: 41.7" / 105.9 cm
  • To top of Lid: 38.2" / 97 cm
  • Widths
  • Conical Body: 18.6" / 47.2 cm
  • Stand Rings: 18" / 45.7 cm
  • 6" / 15.2 cm Screw Top Lid with Hollow Rubber Gaskets
  • This is the same lid as the 7.9G FastFerment and our newest rubber hollow gasket that creates the perfect seal every time
  • 14 US Gallons / 53 Litres
  • Total capacity including the Collection Ball
  • 1.5" / 3.8 cm Teflon Seated Union Valve with Fittings
  • 47” / 12 mm diameter legs & .55” / 14 mm diameter rings
  • +33% thicker than the 7.9G FastFerment Stand
  • Exterior Volume Markings on Vessel and the Collection Ball
  • ½” diameter hose for fast keg filling
  • Stand Weights: 12.5 lbs 14G Stand / 7.4 lbs Stand Leg Extension Kit
Read more
Add to wishlist

Description

Easy & Efficient

The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods. With less equipment, clean up is easy.

Premium

FastFerment is a professional system for the average Homebrewer & Winemaker. The conical design limits exposure to oxygen & allows for yeast harvesting. The end result is consistent high quality batches of beer & wine.

Benefits Over Traditional Conicals

The downfall of other conical fermenters is that you have to ferment the product with the valve closed and then the sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the sediment out the bottom. This results in two main issues:

  1. You need to time the flushing of the sediment perfectly to ensure minimal loss of product.
  2. As the sediment is flushed out, there will always be yeast and the sediment hazes that float up into the product remaining in the unit.

Specifications

  1. Conical Body & Collection Ball
    • +33% Thicker than the 7.9G FastFerment
    • Food Grade HDPE
    • Collection Ball Volume - 40.6 oz / 1200ml

 

    • 1.5" 3.8 cm Teflon Seated Valve
    • +33% Larger than the 7.9G FastFerment
    • All BPA Free Plastics

 

  • Heights
  • To top of airlock: 41.7" / 105.9 cm
  • To top of Lid: 38.2" / 97 cm
  • Widths
  • Conical Body: 18.6" / 47.2 cm
  • Stand Rings: 18" / 45.7 cm
  • 6" / 15.2 cm Screw Top Lid with Hollow Rubber Gaskets
  • This is the same lid as the 7.9G FastFerment and our newest rubber hollow gasket that creates the perfect seal every time
  • 14 US Gallons / 53 Litres
  • Total capacity including the Collection Ball
  • 1.5" / 3.8 cm Teflon Seated Union Valve with Fittings
  • 47” / 12 mm diameter legs & .55” / 14 mm diameter rings
  • +33% thicker than the 7.9G FastFerment Stand
  • Exterior Volume Markings on Vessel and the Collection Ball
  • ½” diameter hose for fast keg filling
  • Stand Weights: 12.5 lbs 14G Stand / 7.4 lbs Stand Leg Extension Kit

Additional info

SKU: 14GFF
Shipping: Calculated at Checkout
MAP: MAP