Sexy Blonde Beer Kit
Brand : Label Peelers
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- LPSexyBl
- UPC:
- 810194950582
- Shipping:
- Calculated at Checkout
Your next brew day could be the Sexy Blonde beer kit, a 5-gallon extract recipe with honey, citrus and lemon notes, hopped with Simcoe and Warrior. You'll pour a deep gold beer of about 8.5-8.8% ABV and 78 IBUs, and your grains get crushed to order.
Description
Sexy Blonde gives you a light and crisp flavor with hints of honey and toasted malt from the Pale Malt and Gambrinus Honey Malt, plus a subtle citrus aroma from the Simcoe hops and Dry Lemon Peel. The body stays light and effervescent with a smooth finish and slight hop bitterness from the Warrior addition, while the White Labs California Ale yeast ferments clean so the malt and hop notes stay forward.
No shelf time for your Label Peelers Sexy Blonde Original Beer Kit. Every grain bill is crushed to order. Fresh packing, no flashy box to pay for. It's all about getting fresh ingredients into your hands so you can brew a beer you're proud of.
Beer Specifications
- ABV: 8.5% - 8.8%
- Original Gravity: 1.087
- Final Gravity: 1.020
- IBUs: 78
- SRM: 8
Ingredients
Extracts
- 9 lbs Light DME
Specialty Grains (combined into one bag)
- 1 lb Pale Malt
- 1 lb Gambrinus Honey Malt
Hops (substitutions based on availability)
- 1 oz Warrior Hop Pellets (Add at the start of your boil, then boil for 60 Min)
- 1 oz Simcoe Hop Pellets (add to your boil after 45 minutes)
- 1 oz Simcoe Hop Pellets (add to your boil after 55 minutes)
Yeast (substitutions based on availability)
- White Labs California Ale WLPD001
Spice Pack ((added to boil for the last 20 mins))
- 1 oz Dry Lemon Peel
Also Included
- 5 oz Priming Sugar
- 2x Muslin Bags
Instructions
Hop Schedule
- 60 minutes: 1 oz Warrior Hop Pellets
- 15 minutes: 1 oz Simcoe Hop Pellets
- 5 minutes: 1 oz Simcoe Hop Pellets
- Add 2 gallons of water into your brew kettle and heat to 150-160 degrees F. Pour your specialty grains into the muslin bag and add into your water. Steep for 20-30 minutes at this temperature, moving the bag every few minutes. Remove grain bag and sparge with warm water to get the most from your grains.
- Heat the water to just short of a boil. Take the pot off the heat and add the malt extracts. When the malt extract has fully dissolved, put it back on the heat. Once the wort boils again, put the bittering hops in the large bag and FOLLOW HOP SCHEDULE ABOVE, adding each hop to that same bag. Don't forget the spice pack added with 20 minutes remaining.
- At 45 minutes, add Irish moss (Optional Clarifier-Sold Separately) and boil the last 15 minutes.
- Off the heat, cool the wort to around 70 degrees with an ice bath or immersion chiller. Transfer your cool wort to a sanitized primary fermenter and top up to 5 gallons with cool, clean water.
- Add your yeast and ferment around 65-75 degrees for 5-7 days. Once fermentation slows, transfer beer into secondary. Let sit for a minimum of 2-3 weeks at fermentation temperatures to assure fermentation is complete.
- Carefully transfer into bottling bucket that has priming sugar dissolved in bottom (or carbonate in a soda keg if you prefer kegging). Once the transfer is done, bottle as usual. Give the bottles at least 2-4 weeks before drinking so they fully carbonate. Enjoy!
Overall rating: 5.0 / 5 from 3 reviews.
Reviews
Have not tasted yet
"Have not tasted yet"
Sexy Blonde
"MMMM, Delish! Great job guy's!"
Sexy Blonde
"Very smooth yet strong brew"