Burning River Pale Ale Clone Beer Kit
Brand : Real Fake Beer
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- LPBurnRiv
- UPC:
- 632016997175
- Shipping:
- Calculated at Checkout
Brew the Burning River Pale Ale Clone beer kit and you're working with a 5 gallon extract recipe with citrus, floral and caramel notes, built on Cascade hops and Safale US-05 yeast. Look for an amber color, about 6.8-7.1% ABV, 65 IBUs, and we mill your grains to order.
Description
Burning River Pale Ale Clone gives you a balanced pale ale with citrus and floral notes from Cascade hops added at multiple stages for bittering, flavor, aroma, and dry hopping. The Golden Light DME forms a clean base while the Caramel 40L and Biscuit malts contribute caramel sweetness and toasty depth. Safale US-05 ferments cleanly, keeping the hop character forward. You get moderate bitterness balanced by subtle malt, modeled on the Great Lakes Brewing original.
If your equipment allows you to do a full boil do so. This will give you a fuller hop flavor and aroma quality. When you are dry hopping do not fill the carboy up to the top because the hops will absorb beer and expand. Leave about three to four inches below the bung or carboy cap.
Your Burning River Pale Ale Clone kit goes out without ever sitting on a shelf. You get grains crushed to order and ingredients packed fresh, without paying for a flashy box. Everything is aimed at fresh ingredients for a great batch of your own.
Beer Specifications
- ABV: 6.8% - 7.1%
- Original Gravity: 1.065
- Final Gravity: 1.012
- IBUs: 65
- SRM: 12
Ingredients
Extracts
- 7 lbs. - Golden Light DME
Malts (combined into one bag)
- 1 lb - Caramel 40L Malt
- 4 oz - Biscuit Malt
Hops (substitutions based on availability)
- 3 oz - Cascade Hops (90 Mins Bittering)
- 1 oz - Cascade Hops (15 Mins Flavor)
- 1 oz - Cascade Hops (2 Mins Aroma)
- 1 oz - Cascade Hops (Dry Hop for approximately 3-4 days)
Yeast (substitutions based on availability)
- Safale US-05
Also Included
- 5 oz - Priming Sugar
- 2 - Grain Bags
- Irish Moss/Energizer Combo Packet
Instructions
Hop Schedule
- 90 minutes: 3 oz. Cascade Hops (Bittering)
- 15 minutes: 1 oz. Cascade Hops (Flavor)
- 2 minutes: 1 oz. Cascade Hops (Aroma)
- Dry Hop: 1 oz. Cascade Hops (approximately 3-4 days)
- Get 2-3 gallons of water up to 155°F.
- Fill the muslin grain bag with the grains and let them steep in the hot water for 30 minutes.
- Remove the grain bag, sparge (rinse the grains) with water into the kettle, and discard.
- Stir in the malt extract until it dissolves completely.
- Heat the wort until it reaches a rolling boil.
- Add the hops according to the hop schedule listed above.
- Hold the boil for 90 minutes, stirring every so often.
- When 15 minutes remain, stir in the Yeast Energizer / Irish Moss Combo Packet.
- Once the 60 minute boil is complete, cool the wort to around 70°F with an ice bath or immersion wort chiller.
- Get the wort into a sanitized fermenter and bring it to 5 gallons with cold water.
- Seal the fermenter once the yeast is pitched.
- Keep the fermenter at 68-70°F for 10-14 days or until fermentation is complete.
- Your beer goes into a bottling bucket next; stir in 5 oz. priming sugar. Mix it evenly through the beer and bottle.
- Carbonation takes 2 weeks in a cool, dark room. Enjoy!
Overall rating: 4.0 / 5 from 1 reviews.
Reviews
Burning River Pale Ale Clone
"Good kit. Tastes a lot like the original. One suggestion would be to use a liquid yeast such as Wyeast or White Labs."