Nevada Summit Climber Pale Ale Clone Beer Kit - All Grain
Brand : Real Fake Beer
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- LP-All-Grain-Nevada-Pale-Ale-G
- UPC:
- 10766679225270
- Shipping:
- Calculated at Checkout
Nevada Summit Climber Pale Ale Clone is a 5-gallon all grain recipe with citrus, malty and caramel notes, using Summit, Perle and Cascade hops and SafAle US-05 yeast. You'll pour a deep gold beer of about 5.5-5.9% ABV and 36 IBUs, and your grains are crushed to order.
Description
This Nevada Summit Climber Pale Ale Clone is modeled on Sierra Nevada Pale Ale and gives you a deep amber hue with balanced malt and piney-citrus hops. 9.5 lbs of 2-Row Brewers Malt forms the malty backbone while 1 lb Caramel/Crystal Malt 60L and 8 oz Carapils Malt add caramel sweetness and creamy mouthfeel. 1 oz Perle at 60 minutes supplies robust bitterness, and three ounces of Cascade across flavor, aroma, and dry-hop additions deliver citrus and pine character. The American Ale Yeast (SafAle US-05) ferments cleanly so the hop notes stay prominent.
Your Nevada Summit Climber Pale Ale Clone Beer Kit goes out without ever sitting on a shelf. We mill your grains to order. The ingredients are packed fresh, and your money doesn't go to a flashy box. Everything is aimed at fresh ingredients for a great batch of your own.
Beer Specifications
- ABV: 5.5% - 5.9%
- Original Gravity: 1.056 - 1.064
- Final Gravity: 1.011 - 1.015
- IBUs: 36
- SRM: 9
Ingredients
Grain Bill (crushed into one bag)
- 9.5 lbs 2-Row Brewers Malt
- 1 lb Caramel/Crystal Malt 60L
- 8 oz Carapils Malt
Hops (substitutions based on availability)
- 1 oz Perle Hops
- 3 oz Cascade Hops
Yeast (substitutions based on availability)
- 1 packet American Ale Yeast (SafAle US-05)
Also Included
- 1 Irish Moss/Yeast Energizer Combo (Last 15 Mins of boil)
- 5 oz Priming Sugar
Instructions
Hop Schedule
- 1 oz Perle Hops and boil for 60 minutes.
- 1 oz Cascade Hops with 10 minutes remaining.
- 1 oz Cascade Hops at flameout.
- 1 oz Cascade Hops (Dry Hop 7 Days)
- Make sure every piece of brewing gear is sanitized.
- Take 3.5 gallons of water up to 165°F. Add crushed grains to your mash tun.
- Mash at 152°F for 60 minutes, stirring occasionally to maintain temperature.
- Warm 4 gallons of sparge water to 170°F. Rinse the grains slowly, aiming for about 6.5 gallons of pre-boil wort.
- Get your wort to a rolling boil.
- Add hops at the following times: 1 oz Perle at 60 minutes (bittering). 1 oz Cascade at 10 minutes. Irish Moss/Yeast Energizer Combo at 15 minutes. 1 oz Cascade at flameout (0 minutes).
- Your total boil runs 60 minutes.
- Cool the wort rapidly using an immersion or counterflow chiller to 68°F.
- Get it into a sanitized fermenter and top off to exactly 5 gallons.
- Once the yeast is pitched, ferment for 7–10 days at 68°F.
- After primary fermentation is complete, add 1 oz Cascade hops directly to the fermenter and let it sit for 7 days.
Bottle Conditioning
- Mix 5 oz of priming sugar into 2 cups boiling water to dissolve it and let it cool.
- Move the beer to a sanitized bottling bucket and leave the sediment behind.
- Add the priming sugar solution with a gentle stir, without aerating the beer.
- Use sanitized bottles for bottling, and cap them firmly.
- Hold the bottles at room temperature for 2-3 weeks for carbonation.
Kegging
- Fill a sanitized keg with the beer.
- Seal it up and burp the keg with COâ‚‚ to push out oxygen.
- Hold the keg at 38°F with the regulator set to 12 PSI for 2-3 weeks before serving.