Sequoia’s Celebration Ale Clone Beer Kit - All Grain
Brand : Real Fake Beer
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- LP-Sequoias-Celebration-Ale-Clone-All-Grain
- UPC:
- 810194955372
- Shipping:
- Calculated at Checkout
Sequoia’s Celebration Ale Clone is a 5-gallon all grain recipe with citrus, pine and caramel notes, hopped with Cascade and Centennial and fermented with SafAle US-05 yeast. It finishes around 6.5-6.9% ABV and 65 IBUs with an amber color, and your grains get crushed to order.
Description
In your glass, Sequoia’s Celebration Ale Clone brings the bold piney and citrusy hop character of Sierra Nevada’s Celebration Ale into your homebrew. Cascade and Centennial hops give bright citrus aroma with pine notes and sharp bitterness that balances the malt sweetness from your Brewers 2-Row, Caramel/Crystal 60, and Bonlander Munich malts.
The result is an amber ale with a robust yet approachable flavor profile and a crisp clean finish. The SafAle US-05 yeast ferments cleanly so the hop character stays forward.
We don't let your Sequoia’s Celebration Ale Clone All Grain Beer Kit sit on a shelf. Your grains are milled to order. We pack it all fresh and leave the flashy box (and its cost) out. It all comes down to fresh ingredients for a beer you'll be proud to pour.
Beer Specifications
- ABV: 6.5% - 6.9%
- Original Gravity: 1.062 - 1.070
- Final Gravity: 1.013 - 1.017
- IBUs: 65
- SRM: 11
Disclaimer: Calculated values are approximate.
Ingredients
Base & Specialty Malts (combined into one bag)
- 10 lbs Brewers 2-Row Malt
- 1 lb Caramel/Crystal 60 Malt
- 1.5 lbs BonlanderMunich Malt
Hops (substitutions based on availability)
- 3 oz Cascade Hops
- 2 oz Centennial Hops
Yeast (substitutions based on availability)
- Packet of Dry Yeast (SafAle US-05)
Also Included
- 5 oz Priming Sugar
Instructions
Hop Schedule
- 60 min: 1 oz Cascade
- 15 min: 1 oz Centennial + 1 oz Cascade
- 5 min: 1 oz Centennial + 1 oz Cascade
Clean & Sanitize
- Start your brew day with a squeaky-clean setup. You want hoppy aromas, not funky microbes.
Mash
- Get 4.0 - 4.5 gallons of strike water to 162°F. *Adjust for your brew systems temperature loss.
- Mash in Brewers 2-Row, Caramel/Crystal 60, and Munich Malt.
- Stir to break up dough balls, and hold 152°F for 60 minutes.
Sparge
- Fill your kettle with 4 gallons of water and heat it to 168°F.
- Sparge the grains gently, collecting around 6.5 gallons of wort.
Boil & Hop Additions
- Keep the wort at a rolling boil for 60 minutes.
- 60 min: 1 oz Cascade
- 15 min: 1 oz Centennial + 1 oz Cascade
- 5 min: 1 oz Centennial + 1 oz Cascade
Cool & Transfer
- Chill wort to about 68°F.
- Transfer to a sanitized fermenter, leaving hop trub behind. Top up to 5 gallons total with cool, clean water.
Fermentation
- Pitch Ale Yeast.
- Ferment at 68°F for roughly 2 weeks or until gravity stabilizes.
Priming for Bottling
- Dissolve the 5 oz of priming sugar in 2 cups of boiling water and let it cool.
- Rack the beer from the fermenter into a sanitized bottling bucket, leaving the sediment behind.
- Stir the priming sugar solution through evenly, gently, without splashing air into the beer.
- Fill your sanitized bottles and seal each cap securely.
- Hold the bottles at room temperature for 2-3 weeks for carbonation.
Kegging
- Transfer your beer to a sanitized keg.
- Seal the keg and purge the oxygen with a few CO₂ burps.
- Hold the keg at 38°F with the regulator set to 12 PSI for 2-3 weeks before serving.
Overall rating: 5.0 / 5 from 1 reviews.
Reviews
Brew , bottle , repeat.
"Excellent recipe . Second time brewing this. Fast to brew and ready to drink in five weeks."