Tropic Tide Pineapple IPA Clone Beer Kit - Extract
Brand : Real Fake Beer
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- LP-Tropic-Tide-Pineapple-IPA-Clone-Extract
- UPC:
- 810194955365
- Shipping:
- Calculated at Checkout
Craving pineapple, tropical and caramel notes? Reach for the Tropic Tide Pineapple IPA Clone kit, a 5 gallon extract recipe, hopped with Columbus, Cascade and Citra and fermented with SafAle US-05 yeast. In the glass it's amber, with roughly 5.3-5.9% ABV and 45 IBUs, and we mill your grains to order.
Description
Tropic Tide Pineapple IPA Clone draws on SweetWater’s Goin’ Coastal for a tropical IPA with a smooth caramel malt backbone and hoppy bitterness. The 6 lbs of Pale Ale Dry Malt Extract supplies a clean base that lets the hops and fruit stand out, while 1 lb of Caramel/Crystal 40L contributes subtle sweetness and body. Columbus, Cascade, and Citra hops deliver citrus and tropical notes that finish with about 45 IBUs of balanced bitterness.
The American Ale Yeast (SafAle US-05) ferments cleanly so the hop and pineapple character remains forward. Adding 2–3 lbs of pineapple in secondary infuses tangy tropical sweetness that complements the citrus hop profile and leaves a crisp finish.
Nothing in your Tropic Tide Pineapple IPA Clone kit sits on a shelf. We mill your grains to order. No flashy box to pay for, just ingredients packed fresh for you. Everything is aimed at fresh ingredients for a great batch of your own.
Beer Specifications
- ABV: 5.3% -5.9%
- Original Gravity: 1.049 - 1.059
- Final Gravity: 1.010 - 1.013
- IBUs: 45
- SRM: 11
Disclaimer: All calculations approximate.
Ingredients
Malt Extracts
- 6 lbs Pale Ale Dry Malt Extract
Specialty Grains (combined into one bag)
- 1 lb Caramel/Crystal Malt 40L
Hops (substitutions based on availability)
- 1 oz Columbus (60 min)
- 1 oz Cascade (15 min)
- 1 oz Citra (5 min)
Fruit Addition ((Provided by customer))
- 2–3 lbs Pineapple (secondary) customer provided
Yeast (substitutions based on availability)
- Packet American Ale Yeast (SafAle US-05)
Also Included
- 5 oz Priming Sugar
- 1 Muslin Grain Bag
Instructions
Hop Schedule
- 1 oz Columbus (60 min)
- 1 oz Cascade (15 min)
- 1 oz Citra (5 min)
- Sanitize all your brewing equipment, fermenters, airlocks, stirring spoons, anything that might come into contact with your wort. Remember, cleanliness is key to keeping your beer out of the gutter.
- In your brew kettle, heat 2.5 gallons of water to around 155°F. Place the Caramel/Crystal 40 in the provided muslin bag, then steep for 30 minutes. When steeping is done, lift out the grain bag and let it drain into the kettle; don’t squeeze too hard, or you might extract unwanted tannins (and a squeaking protest from your grains).
- Take the kettle off the heat. Stir in the 6 lbs Pale DME, making sure it dissolves completely. This prevents scorching on the bottom of the kettle once you return to heat. Bring the mixture (now called wort) to a boil.
- Total Boil Time: 60 minutes. At 60 minutes (start of boil): Add 1 oz Columbus Hops. At 15 minutes remaining in the boil: Add 1 oz Cascade. At 5 minutes remaining in the boil: Add 1 oz Citra. Keep an eye on boil-overs and maintain a consistent boil.
- At the end of the 60-minute boil, cool the wort to about 68°F as quickly as possible. An immersion chiller or ice bath works great here.
- Pour the cooled wort into a sanitized fermenter, then top up with clean, filtered water until you reach 5 gallons total. Give the wort a stir or shake to get air into it. Pitch your packet of American Ale Yeast and seal with an airlock. Let it ferment around 14 days at 68°F, or until final gravity stops changing. (Optional) Add 2–3 lbs pineapple chunks/puree to secondary for ~1 week, or pineapple extract at packaging. Taste for balance.
- After primary fermentation, you can rack to a secondary fermenter and cold-crash near 40°F for 1–2 weeks for added clarity. But if you like a little haze, skip it and enjoy your tropical brew.
Bottle Conditioning
- Dissolve 5 oz Priming Sugar in 2 cups of boiling water. Let it cool. Transfer your beer to a sanitized bottling bucket, gently stirring in the sugar solution. Bottle into sanitized bottles, cap them, and hold at room temperature for 2–3 weeks.
Kegging
- Transfer to a sanitized keg. Purge the keg with CO₂, then set the regulator at 12 PSI. Give it 2–3 weeks at 38°F to carbonate properly.