Italian Bottle Spigot
Brand : LD Carlson
This product is eligible for up to 30% off shipping! Start saving 10% at a $50 eligible cart subtotal, increasing by 5% at $100, $150, and $225, with a maximum 30% discount at $300. Some restrictions apply.
- SKU:
- 4882
- UPC:
- 615272912458
- Shipping:
- Calculated at Checkout
Italian Bottle Spigot - 4882 Comes With Nut And Two Washers.
The spigot fits into the 1" diameter hole in your bottling bucket.
Tapered Stem Fits 5/8 & 3/8 Inch Siphon Hose.
Other Uses for this Product
Fit this spigot to a food-grade bucket or jug to make a self-serve drink dispenser for lemonade, iced tea, punch or water at parties.
Overall rating: 4.2 / 5 from 5 reviews.
Reviews
The spigot is too big for the hole
"We measured the components with calipers. The hole is slightly smaller than 1" and the threads on the spigot are larger than 1". Customer service recommended that we push really hard till the threads can catch then screw it in. This worked, the spigot is in, an initial test shows no leaks."
The spigot works great. It
"The spigot works great. It was a little bit too big for the hole. So I took a razor knife to the bucket and made the hole a little bit larger and it worked great"
Handy
"Handy"
Ok, but fragile
"This product works OK but they are kind of fragile. You have to be very careful not to over tighten the nut or it will crack the threaded part and start leaking."
Works but is a bit leaky
"A spigot is necessary for a convenient bottling setup, but ours has a slow drip. Don't leave the wine in the bottling bucket for long or it develops a puddle. Wine shouldn't be left in the bottling bucket for long anyway, and our slightly leaky spigot coupled with my cleaning compulsion means we finish bottling punctually. Can't complain too much for the price though!"
